INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?

Print Thread

INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ? #1937612 10/24/15 01:17 AM 10/24/15 01:17 AM
Joined: May 2005 Posts: 180 merrill, wisconsin V voigtspeed OP member
voigtspeed OP member V Joined: May 2005 Posts: 180 merrill, wisconsin	Fully ported 440-1 heads on a 4.375 bore 499" motor upgrading to the 2.25 intake valve worth it on the 4.375 bore? Any real world numbers would be great.. Thanks Jim ACCELERATION SPECIALIST

Entire Thread
Subject	Posted By	Posted
INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	voigtspeed	10/24/15 05:17 AM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	Cab_Burge	10/24/15 07:34 AM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	gregsdart	10/24/15 03:51 PM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	voigtspeed	10/25/15 04:57 AM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	steve660	10/25/15 05:14 AM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	Thumperdart	10/25/15 04:58 PM
Re: INDY 440-1's on a 4.375 bore 499" 2.25 valve or 2.19 ?	AndyF	10/25/15 06:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1