Copper gaskests for headers

Print Thread

Re: Copper gaskests for headers [Re: MidPenMopar] #1885041 08/04/15 04:38 PM 08/04/15 04:38 PM
Joined: Aug 2009 Posts: 1,318 Ohio J jlatessa pro stock
jlatessa pro stock J Joined: Aug 2009 Posts: 1,318 Ohio	What may help is to cut the header flanges between cylinders #1 & 3, 5 & 7, 2 & 4, 6 & 8. This will allow the flanges to more easily clamp parallel to the head and seal better . Joe

Entire Thread
Subject	Posted By	Posted
Copper gaskests for headers	MidPenMopar	08/03/15 09:01 PM
Re: Copper gaskests for headers	justinp61	08/03/15 10:23 PM
Re: Copper gaskests for headers	MidPenMopar	08/03/15 10:26 PM
Re: Copper gaskests for headers	RapidRobert	08/04/15 12:23 AM
Re: Copper gaskests for headers	MidPenMopar	08/04/15 12:34 AM
Re: Copper gaskests for headers	Challenger 1	08/04/15 01:04 AM
Re: Copper gaskests for headers	MidPenMopar	08/04/15 01:13 AM
Re: Copper gaskests for headers	Challenger 1	08/04/15 01:17 AM
Re: Copper gaskests for headers	MidPenMopar	08/04/15 01:18 AM
Re: Copper gaskests for headers	Neil	08/04/15 02:37 AM
Re: Copper gaskests for headers	cudabitten	08/04/15 05:46 PM
Re: Copper gaskests for headers	John_Kunkel	08/04/15 10:16 PM
Re: Copper gaskests for headers	sleddinfool	08/04/15 12:40 AM
Re: Copper gaskests for headers	Skeptic	08/04/15 12:57 AM
Re: Copper gaskests for headers	TJP	08/04/15 04:18 AM
Re: Copper gaskests for headers	therocks	08/04/15 05:00 PM
Re: Copper gaskests for headers	jlatessa	08/04/15 08:38 PM
Re: Copper gaskests for headers	Yellow Fever	08/04/15 09:44 PM
Re: Copper gaskests for headers	an8sec70cuda	08/05/15 09:25 PM
Re: Copper gaskests for headers	MidPenMopar	08/06/15 01:49 AM

Hop To