yes i do have a PCV valve.....smoke is constant....a real bummer!!!!i looked at seals they look O.K.....is there a chance that a 537 lift cam (30/38) with stamped rockers could leave the valves
open after lifter pump? i run the hughes cam/lifter/spring set....again this combo worked prior to the top end pop...i will do the recommended comp/leak test...it my be semi denial on my part but with low miles on the SB just a drag....on the up side i have a fresh although stock rebuilt 40/440/ShortBlock(flattops/stock rods/cast crank,ect,)....so i guess i should be gratefull....anyways thanks again...
-christian