440-1: leave ports in stock form? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440-1: leave ports in stock form?

Print Thread

Re: 440-1: leave ports in stock form? [Re: griff70440] #187815 01/08/09 09:10 PM 01/08/09 09:10 PM
Joined: Nov 2003 Posts: 6,293 Rock Springs Bob_Coomer master
Bob_Coomer master Joined: Nov 2003 Posts: 6,293 Rock Springs	I picked up a half second after the heads were CNC ported.

Entire Thread
Subject	Posted By	Posted
440-1: leave ports in stock form?	426keith	01/08/09 06:19 PM
Re: 440-1: leave ports in stock form?	B G Racing	01/08/09 06:39 PM
Re: 440-1: leave ports in stock form?	blownzoom440	01/08/09 06:48 PM
Re: 440-1: leave ports in stock form?	gregsdart	01/08/09 07:47 PM
Re: 440-1: leave ports in stock form?	Lil Demon	01/09/09 12:15 AM
Re: 440-1: leave ports in stock form?	griff70440	01/09/09 01:04 AM
Re: 440-1: leave ports in stock form?	Bob_Coomer	01/09/09 01:10 AM
Re: 440-1: leave ports in stock form?	griff70440	01/09/09 01:15 AM
Re: 440-1: leave ports in stock form?	Ari440	01/09/09 01:21 AM
Re: 440-1: leave ports in stock form?	griff70440	01/09/09 01:31 AM
Re: 440-1: leave ports in stock form?	426keith	01/10/09 01:48 PM
Re: 440-1: leave ports in stock form?	blownzoom440	01/10/09 01:57 PM
Re: 440-1: leave ports in stock form?	Hot 340	01/10/09 03:00 PM
Re: 440-1: leave ports in stock form?	426keith	01/10/09 03:20 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1