Ok,

I'm in the process of ordering all the parts I need to rebuild my motor. It's a 2001 360 Magnum motor (bored .030 over) that will have an Edelbrock Air Gap Intake, Holley 3310 DP, EQ heads that allow a .500 of lift, 2.02 intake and 1.62 exhaust. I'm using Speed Pro H116CP30 cast pistons. This motor will be mainly used for the street with a few trips to the track every year. I'd like to go with a cam that has a nice lope, and something that produces power across the RPM range. I don't want a custom ground cam shaft because this build is on a budget and I can't see the need to pay twice as much for one. I favor Comp Cams, but I'm open to all suggestions. So if you could give me suggestions; Make, description, model # and best price from what vendor it would be greatly appreciated. Lastly, try to estimate the HP/TQ this set up would produce.

Thanks for your time.

Regards,
Charles