ok so last b motor broke a crank (see other posts for build) and now I have a 440 block which has been bored .030/align bored/ honed with a torque plate.The steel crank has been turned to 20/20.

I already have reconditioned iron heads (arrowhead 906 2.14/1.81) I might as well use since I've had them 12 years...

I already have a new cam/lifter set that I've had for just as long, here are the specs:

Racer Brown #STH-42
lift intake/ exhaust .520
.050 duration: intake 254 exhaust @ .008 300
lobe centerline 105 intake 111 exhaust
lobe separation 108.00
advanced 3.0

I will be re-using the six pack carbs I had on my 383 that have mods and worked flawlessly.

please give me some ideas for a build which includes the existing 4 speed and Strange s-60 w/ 4.10's and strange-trac (tru-trac)

I am not opposed to selling the finished crank and buying a rotating assembly, but not interested in more than 500 cubes since I am on a budget

I drive this car on the street as well as to and from the track for test & tube nights FOR FUN ONLY


ALL FEEDBACK GOOD AND BAD WELCOMED