Quote:
not sure about instructions for in the car removal/installation. On my wedge we used cork gaskets and glued them to the windage tray with the 3m yellow weatherstrip adhesive. put small dabs of silicone on the rear seal housing and on the corners of the front cover and then torqued from the center outward and has never leaked a drop 
I agree with this but I used the gaskacinch from edelbrock. Glued both sides of each gasket and I also scuffed up the windage tray and pan with a 3m pad on a die grinder before gluing. Its been over a year and no leaks.
1972 Plymouth Cuda 340 4 speed
1971 Plymouth Road Runner 383 Auto
1970 Plymouth Duster /6 Auto
| 
