Originally Posted By BradH
Originally Posted By moparlifer
On victor heads with offset rockers, mine hit the pan rail and had to be ground for clearance and I lost a lot of sealing area when done!

The description on the page I linked above does mention needing to clearance the rail for Victor heads, so not a surprise. I know some rockers would make that more of an issue than others.

EDIT: What about distributor clearance w/ those covers on Victor heads? work


My valve covers are procomp which are similar. I also had to clearance the flange so they would drop straight down over the studs without hitting the HS rockers. I use and re-use Felpro blue stripe cork gaskets on valve covers and oil pan with no sealer and no leaks. I use an MSD distributor without issue. twocents thumbs

Those 440Source covers do look nice with thicker flanges!

VC1.jpg (692 downloads)
MP1.jpg
Sworn Member Central Valley MoPar Drag Pack. You can reach me at (done-et-chasing@going-rounds.gone)... :-)

[img]https://s6.postimg.org/v3mbggksx/SAC16.jpg[/img]image hosting more than 5mb