From an actual Eagle instruction sheet---(have only included the two ARP 2000 specs)

"ESP" Forged Steel H-Beam Connecting Rod Installation Instructions
Fasteners: Rod bolt threads and underside of head of the bolt should be lubricated with ARP Moly Assembly Lube. Do not use oil or Loctite. Warning: If any other lubricant is used on the bolt, bolt stretch method must be used due to different viscosity lubricants. Improper bolt torque will cause premature bolt failure. Cap should be seated on rod by aligning cap by hand and lightly tapping into place. Alternatively tighten bolts to avoid cocking cap.

Torque Specs:
-------Bolt-----------Identification----------Torque--------Bolt Stretch
7/16 ARP 2000---7/16 bolt head--------75 ft lbs-------.0064-.0068
3/8 ARP 2000----7/16 bolt head--------43 ft lbs--------.0055-.0059

The INTERNET, the MISinformation superhighway