preparing for oiling sb mods

Print Thread

Re: preparing for oiling sb mods [Re: qwkmopardan] #1818549 05/04/15 03:17 PM 05/04/15 03:17 PM
Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan mopar dave OP master
mopar dave OP master Joined: Jan 2007 Posts: 8,043 Mt Morris Michigan	ok, 2,3,4 main oil feeds only. thanks for that. I have been spray bar oiling the top end(valve,rockers,etc) for 8+yrs with the oil passage to the heads plugged. just gonna drill a .060" hole in the plugs just for piece of mind. http://www.youtube.com/watch?v=aIxaesJ190U http://youtu.be/lCZAaN7fFLg

Entire Thread
Subject	Posted By	Posted
preparing for oiling sb mods	mopar dave	05/04/15 01:27 AM
Re: preparing for oiling sb mods	poboyengineering	05/04/15 10:24 AM
Re: preparing for oiling sb mods	Guitar Jones	05/04/15 11:56 AM
Re: preparing for oiling sb mods	justinp61	05/04/15 02:29 PM
Re: preparing for oiling sb mods	Streetwize	05/04/15 02:41 PM
Re: preparing for oiling sb mods	justinp61	05/04/15 02:57 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 03:06 PM
Re: preparing for oiling sb mods	Michael Ecks	05/04/15 03:11 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 03:37 PM
Re: preparing for oiling sb mods	qwkmopardan	05/04/15 06:53 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 07:17 PM
Re: preparing for oiling sb mods	Bad340fish	05/04/15 07:47 PM
Re: preparing for oiling sb mods	Streetwize	05/04/15 10:10 PM
Re: preparing for oiling sb mods	mopar dave	05/05/15 12:16 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 12:14 AM
Re: preparing for oiling sb mods	CMcAllister	05/05/15 03:23 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 04:55 AM
Re: preparing for oiling sb mods	CMcAllister	05/05/15 05:06 AM
Re: preparing for oiling sb mods	poboyengineering	05/05/15 03:57 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 04:57 AM

Hop To