preparing for oiling sb mods

Print Thread

Re: preparing for oiling sb mods [Re: mopar dave] #1819075 05/05/15 01:06 AM 05/05/15 01:06 AM
Joined: Dec 2005 Posts: 11,611 Fulton County, PA C CMcAllister Mr. Helpful
CMcAllister Mr. Helpful C Joined: Dec 2005 Posts: 11,611 Fulton County, PA	Originally Posted By mopar dave 7500 would be max shift point and may be 7000. 4" eagle forged. I don't have any experience with that crank but I've had 2 engines with the stock iron crank and at 7400 I couldn't keep rod bearings in them until I took the oil supply for the heads completely off of the cam. If the results don't match the theory, change the theory.

Entire Thread
Subject	Posted By	Posted
preparing for oiling sb mods	mopar dave	05/04/15 01:27 AM
Re: preparing for oiling sb mods	poboyengineering	05/04/15 10:24 AM
Re: preparing for oiling sb mods	Guitar Jones	05/04/15 11:56 AM
Re: preparing for oiling sb mods	justinp61	05/04/15 02:29 PM
Re: preparing for oiling sb mods	Streetwize	05/04/15 02:41 PM
Re: preparing for oiling sb mods	justinp61	05/04/15 02:57 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 03:06 PM
Re: preparing for oiling sb mods	Michael Ecks	05/04/15 03:11 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 03:37 PM
Re: preparing for oiling sb mods	qwkmopardan	05/04/15 06:53 PM
Re: preparing for oiling sb mods	mopar dave	05/04/15 07:17 PM
Re: preparing for oiling sb mods	Bad340fish	05/04/15 07:47 PM
Re: preparing for oiling sb mods	Streetwize	05/04/15 10:10 PM
Re: preparing for oiling sb mods	mopar dave	05/05/15 12:16 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 12:14 AM
Re: preparing for oiling sb mods	CMcAllister	05/05/15 03:23 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 04:55 AM
Re: preparing for oiling sb mods	CMcAllister	05/05/15 05:06 AM
Re: preparing for oiling sb mods	poboyengineering	05/05/15 03:57 AM
Re: preparing for oiling sb mods	mopar dave	05/05/15 04:57 AM

Hop To