440 rods,low cost but good ones - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440 rods,low cost but good ones

Print Thread

440 rods,low cost but good ones #1813490 04/27/15 11:08 PM 04/27/15 11:08 PM
Joined: Jul 2007 Posts: 735 Pa. U.S.A. moparborn OP super stock
moparborn OP super stock Joined: Jul 2007 Posts: 735 Pa. U.S.A.	What rods are available for a 6.76 rod,2.375-2.75-1.094 at a good price but not cheapies? I have late model stockers,I could send them out to be worked over but I do not think they would hold up in a stroker.

Entire Thread
Subject	Posted By	Posted
440 rods,low cost but good ones	moparborn	04/28/15 03:08 AM
Re: 440 rods,low cost but good ones	Cab_Burge	04/28/15 05:36 AM
Re: 440 rods,low cost but good ones	littleVAL	04/29/15 04:52 AM
Re: 440 rods,low cost but good ones	440sourcedotcom	04/29/15 07:39 PM
Re: 440 rods,low cost but good ones	BradH	04/29/15 09:23 PM
Re: 440 rods,low cost but good ones	an8sec70cuda	04/29/15 09:30 PM
Re: 440 rods,low cost but good ones	Twostick	04/30/15 07:44 AM
Re: 440 rods,low cost but good ones	BradH	04/30/15 05:20 PM
Re: 440 rods,low cost but good ones	Twostick	04/30/15 06:06 PM
Re: 440 rods,low cost but good ones	Alchemi	04/30/15 06:59 AM
Re: 440 rods,low cost but good ones	J_BODY	04/29/15 11:27 PM
Re: 440 rods,low cost but good ones	Randy..	04/30/15 12:01 AM
Re: 440 rods,low cost but good ones	BradH	04/30/15 07:14 AM
Re: 440 rods,low cost but good ones	GTX MATT	04/30/15 03:25 AM
Re: 440 rods,low cost but good ones	moparborn	04/30/15 03:33 AM
Re: 440 rods,low cost but good ones	an8sec70cuda	04/30/15 06:24 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1