Originally Posted By minivan
I have read on this site about the water pump impeller being loose on the shaft.. Might want to take your water pump off and check it..

Ditch the flex fan as said above more than once and use a good stock fan with a good clutch fan...


Good guesses. They involve both time and money that may not be needed if he gets a temp gun and finds out what the temperatures look like.

If the impeller was loose then water would not flow. To check that all he has to do is remove the cap and see if coolant is flowing.

We are brothers and sisters doing time on the planet for better or worse. I'll take the better, if you don't mind.
- Stu Harmon