360 to 408, or 340 to 410?

Print Thread

Re: 360 to 408, or 340 to 410? [Re: wkroncke17] #1794623 04/02/15 01:26 AM 04/02/15 01:26 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Quote: Quote: The 340 block is the rarer of the two, so I would keep the 340 and do the 360. - looking at it from a financial standpoint. Save it for what... if ya got it.. use it EDIT If he wants to sell the 340 block I'll buy it Haha! Sorry Mike......I will use the 340 if it's the better choice? So don't go telling me the 360 is better just to get me to sell you the 340. I'll be using the stock heads,,,,,,stock '72 heads have 1.88 intake, correct? Might get Eddys at best. Wally. Really.. if your using stock type heads it wont matter.. its gonna be the same stroke so the torque will be very close either way... if you were racing it then yes the 340 is better.. bigger bore and smaller mains

Entire Thread
Subject	Posted By	Posted
360 to 408, or 340 to 410?	wkroncke17	04/02/15 04:52 AM
Re: 360 to 408, or 340 to 410?	MR_P_BODY	04/02/15 04:58 AM
Re: 360 to 408, or 340 to 410?	wkroncke17	04/02/15 03:07 PM
Re: 360 to 408, or 340 to 410?	MR_P_BODY	04/02/15 03:26 PM
Re: 360 to 408, or 340 to 410?	Crizila	04/02/15 04:59 AM
Re: 360 to 408, or 340 to 410?	MR_P_BODY	04/02/15 05:02 AM
Re: 360 to 408, or 340 to 410?	wkroncke17	04/02/15 05:19 AM
Re: 360 to 408, or 340 to 410?	MR_P_BODY	04/02/15 05:26 AM
Re: 360 to 408, or 340 to 410?	Oyvind Mopar	04/02/15 10:26 AM
Re: 360 to 408, or 340 to 410?	justinp61	04/02/15 03:47 PM
Re: 360 to 408, or 340 to 410?	Crizila	04/02/15 04:26 PM
Re: 360 to 408, or 340 to 410?	Streetwize	04/02/15 04:59 PM
Re: 360 to 408, or 340 to 410?	HotRodDave	04/02/15 05:18 PM
Re: 360 to 408, or 340 to 410?	Crizila	04/02/15 06:24 PM
Re: 360 to 408, or 340 to 410?	Moparnut426	04/02/15 06:34 PM
Re: 360 to 408, or 340 to 410?	cheapstreetdustr	04/02/15 07:31 PM
Re: 360 to 408, or 340 to 410?	Streetwize	04/02/15 08:35 PM
Re: 360 to 408, or 340 to 410?	justinp61	04/02/15 08:37 PM
Re: 360 to 408, or 340 to 410?	Crizila	04/02/15 09:51 PM
Re: 360 to 408, or 340 to 410?	wkroncke17	04/03/15 03:20 AM
Re: 360 to 408, or 340 to 410?	340_Dart	04/03/15 04:09 AM
Re: 360 to 408, or 340 to 410?	wkroncke17	04/03/15 04:05 PM
Re: 360 to 408, or 340 to 410?	Streetwize	04/03/15 04:16 PM
Re: 360 to 408, or 340 to 410?	340_Dart	04/03/15 04:25 PM
Re: 360 to 408, or 340 to 410?	VIPERDUST	04/09/15 04:43 AM
Re: 360 to 408, or 340 to 410?	mrsmallblock	04/10/15 02:45 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To