Quote:

---

Quote:

---

I have a rear sump pan and the dipstick hole is in the front, how do i make it work? the pan is baffled to keep from flying out of the sump.

---

Sounds like you have same problem as me. The front of my pan next to the dipstick is so shallow that the stick hits the bottom of the pan. No way do I want the oil level that high. Still thinking about what I'm going to do. Site glass tube, relocate dipstick tube to the pan.
Doug

---

Is the stick hitting the pan or the baffle.. if its
hitting the baffle just drill a hole in it for the
stick to go down through
EDIT
If the OP has a pan like Doug is talking about I would
just weld in a port on the pan... is it steel or
alum either way... weld a bung on the side for the
stick to mount in.. just put it to clear everything
(inside and out)