I'll throw in my ... You don't need CNC heads and could save some $$$ by having a set of standard EZ-1s prepped by somebody like PRH. That'll get 90+% of the results as the 295 CNC heads for a good bit less coin.

If you MUST buy CNC heads, look at AndyF's results using the MCH-ported EZs. I like the idea of not having to use an external oil line, which you'll need to do w/ the ICH 295 CNC heads. You don't have the right combination to run the ICH 325 CNC. Also, you really need to put a "real" cam in that engine ASAP since you're going to the trouble of throwing all the $$$ into the heads. That lil' street roller in it now is a crappy match for any of the head choices you're considering.