Thanks.
I've been putting off tearing it apart for a few years.
The thing is pretty much original EXCEPT for the drive train.
I'm using a Harbor Freight pressure pot and a homemade gun that uses 3/32 soda tips and a ball valve instead of a trigger.
Using "play-sand" from Lowe's.
I've done quite a bit of blasting at home over the years and this is by FAR the best I've had it work.
70` Cuda`,440 6BBL Jerico,Dana 4.56 Still on 93 Pump Gas
9.87 @ 136/1.31-60ft.`09 Mopar Nationals PASSON PERFORMANCE "Stick-Shift" Champ!
2013 StickShift Challenge Winner@ Mopar Nationals!
| 
