Posted By: 6bblFLASH
`68 Satellite Deconstruction - 03/15/15 08:12 PM
Some pictures of my 68` as I blast it.
`68 Satellite Deconstruction
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/15/15 08:26 PM
1
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/15/15 08:27 PM
2
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/15/15 08:29 PM
3
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/15/15 08:30 PM
4
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/15/15 08:32 PM
Only a couple pin-holes about 1/8th" in the floor and thats it.
Posted By: RUNCHARGER
Re: `68 Satellite Deconstruction - 03/15/15 09:09 PM
Clean car.
Sheldon
Sheldon
Posted By: RTSrunner
Re: `68 Satellite Deconstruction - 03/16/15 08:20 AM
What media and equipment did you use to blast it? Looks great!
Posted By: 6bblFLASH
Re: `68 Satellite Deconstruction - 03/16/15 11:58 AM
Thanks.
I've been putting off tearing it apart for a few years.
The thing is pretty much original EXCEPT for the drive train.
I'm using a Harbor Freight pressure pot and a homemade gun that uses 3/32 soda tips and a ball valve instead of a trigger.
Using "play-sand" from Lowe's.
I've done quite a bit of blasting at home over the years and this is by FAR the best I've had it work.
I've been putting off tearing it apart for a few years.
The thing is pretty much original EXCEPT for the drive train.
I'm using a Harbor Freight pressure pot and a homemade gun that uses 3/32 soda tips and a ball valve instead of a trigger.
Using "play-sand" from Lowe's.
I've done quite a bit of blasting at home over the years and this is by FAR the best I've had it work.