Is This Supposed to be Bent Like This

Print Thread

Is This Supposed to be Bent Like This #1755266 02/15/15 07:33 PM 02/15/15 07:33 PM
Joined: May 2007 Posts: 545 Massachusetts LYNCHROAD69.5 OP mopar
LYNCHROAD69.5 OP mopar Joined: May 2007 Posts: 545 Massachusetts	68-69 B-Body clutch pedal. I have placed the face of the pivot shaft so that it sits perfectly flat on a level surface. Just wasn't sure if it was supposed to be straighter than this. 8430316-20150214_182226.jpg (177 downloads)

Entire Thread
Subject	Posted By	Posted
Is This Supposed to be Bent Like This	LYNCHROAD69.5	02/15/15 11:33 PM
Re: Is This Supposed to be Bent Like This	LYNCHROAD69.5	02/15/15 11:33 PM
Re: Is This Supposed to be Bent Like This	LYNCHROAD69.5	02/17/15 04:44 PM
Re: Is This Supposed to be Bent Like This	gtx6970	02/17/15 04:51 PM
Re: Is This Supposed to be Bent Like This	mattsmopars	02/17/15 09:21 PM
Re: Is This Supposed to be Bent Like This	mattsmopars	02/17/15 09:22 PM
Re: Is This Supposed to be Bent Like This	mattsmopars	02/17/15 09:24 PM
Re: Is This Supposed to be Bent Like This	LYNCHROAD69.5	02/18/15 04:37 AM

Hop To