Posted By: LYNCHROAD69.5
Is This Supposed to be Bent Like This - 02/15/15 11:33 PM
68-69 B-Body clutch pedal. I have placed the face of the pivot shaft so that it sits perfectly flat on a level surface. Just wasn't sure if it was supposed to be straighter than this.
Posted By: gtx6970
Re: Is This Supposed to be Bent Like This - 02/17/15 04:51 PM
I have a clutch pedal setup done for a 68 Charger,,,will ck later today but I am pretty sure its supposed to be straight
Posted By: mattsmopars
Re: Is This Supposed to be Bent Like This - 02/17/15 09:21 PM
just some I came up with searching on ebay.
Matt
Posted By: mattsmopars
Re: Is This Supposed to be Bent Like This - 02/17/15 09:24 PM
3.
Looks like the clutch pedal should be basically straight and the brake pedal should have the bend.
Hope these help.
Matt
Posted By: LYNCHROAD69.5
Re: Is This Supposed to be Bent Like This - 02/18/15 04:37 AM
That's what I suspected....thanks for confirming