Thanks everyone. It ended up being both the float and needle. Everything is taken care of and its running great and receiving a oil change currently.. I'm trying to help my neighbor get his old 55 going. It has a small block with a edelbrock 1406 600 cfm carb. I can get the car to run and keep going as long as I hit the gas, but it won't idle or run at a steady rpm. I'm guessing there is a float issue or something like that but I'm only really familiar with the holley's so I'm not to sure where to start. The car has been sitting for 2 years but has fresh gas. It also seems to be puking some gas from the top of the carb. Any idears? Thanks! -Jon
Last edited by blown340; 12/26/08 08:38 PM.
70 challenger convertible. 340/5 speed. blown, intercooled, efi, blah blah blah
71 valiant scamp 318/A833OD/AC/PS
00 dakota RC 4.7L 5 spd autoX'r. SRT10/T56 swap in process
73 W200 Power wagon, PTO winch, 4 spd
|