As I posted before,
I believe you're talking about Blues_Cuda / Scott Litzau.
His contact info is in the link.
https://board.moparts.org/ubbthreads/show...hat=showmembersScott and his dad Rich started making the tie down plates that are sandwiched between the leaf springs and the shock plates earlier this year (about May).
He posted here on Moparts about selling them but I can't find any of the posts on them.
I thought about getting a set but didn't want to take the Caltrac's loose on my car.
What I thought about doing on my car is adding a small metal loop on the front of the lower shock stud.
Since I have Caltracs (rather than the stock shock plates) the shock mount stud is a bolt on instead of being welded on.
