I have a 70 Cuda 440-6 with the original 4 speed and 4.10 dana. However, I have the original bare block and intake, no engine internals etc. I would like it to look stock under the hood. My assumption is to buy a quality new crank and rods as those can not be seen. I believe the harmonic balancer is different than a tradditional 440, I would like the correct looking one. The cylinder heads, better off with a used set or better off with a new set that look correct? Are the correct heads readily available? The camshaft, i have been told that I am better off with a hydraulic roller camshaft. They make more power and better off than a solid lifter type... Sorry about the book, I am new to the site and appreciate the input.
Thanks!!