Quote:

This is what I have. Valley cover & oil pump were included with the motor. Water fittings are in the heads. Front cover & balancer were not. I have some work ahead to get this all put together.



Yeah you have the fittings in the heads but are you
gonna run braided line to all them and what will the
other ends hook up to... I made 2 manifolds that
mounted to the head fittings then they have 2 short
lengths of braided that go to the tank that has the
radiator cap on it... plus I needed something up
high(my radiator mounts low) so the air gets out the
top easy