measuring lift at the valve

Print Thread

Re: measuring lift at the valve [Re: mopar dave] #1664428 08/29/14 02:17 PM 08/29/14 02:17 PM
Joined: Jan 2003 Posts: 3,505 DFW M mr_340 master
mr_340 master M Joined: Jan 2003 Posts: 3,505 DFW	I ended up with ~.475" lift with the .528" MP cam using 273 rockers. The .028"/.032" lash accounted for most of the loss, the rest probably in the 273 rocker ratio being less than 1.5.

Entire Thread
Subject	Posted By	Posted
measuring lift at the valve	Crizila	08/27/14 10:04 PM
Re: measuring lift at the valve	dogdays	08/27/14 10:17 PM
Re: measuring lift at the valve	70AARcuda	08/27/14 11:00 PM
Re: measuring lift at the valve	Crizila	08/28/14 03:51 AM
Re: measuring lift at the valve	Cab_Burge	08/28/14 04:47 AM
Re: measuring lift at the valve	Crizila	08/28/14 05:37 PM
Re: measuring lift at the valve	MR_P_BODY	08/27/14 10:25 PM
Re: measuring lift at the valve	BIG DRAG	08/27/14 10:31 PM
Re: measuring lift at the valve	onig	08/28/14 04:07 AM
Re: measuring lift at the valve	mopar dave	08/28/14 05:45 PM
Re: measuring lift at the valve	mr_340	08/29/14 06:17 PM
Re: measuring lift at the valve	moper	08/29/14 06:28 PM

Hop To