I have an old Stewart Warner 960AA tach (does not require a sending unit) that I am trying to get to work with a Prestolite black box ignition system.

I do not have any wiring instructions so I contacted SW to find out if they could help but they no longer have any installation instructions for the old products. They did send me a drawing but the terminals are not labeled. The tach has three terminals on the back, one for coil, power and ground that were labeled when I got it. I hooked it up according to the labels but got nothing. Tried switching the coil signal wire from (-) to (+) with no difference.

Before I send it out for repair, I would like to try and find a copy of the installation instructions for this model, so if anyone would happen to have them, I would like to get a copy. Also, if anyone has used one of these with a transistor ignition, any advice would be appreciated.

Thanks,
Jim