Dry sump inlet - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Dry sump inlet

Print Thread

Re: Dry sump inlet [Re: rickseeman] #1640809 07/02/14 01:56 PM 07/02/14 01:56 PM
Joined: Jan 2003 Posts: 31,075 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,075 Oregon	I make several different block plates. Some engine builders prefer a NPT fitting while others want an o-ring or AN fitting. Some want the fitting to come straight out, others want the fitting pointed to the front. http://arengineering.com/home-page/dry-sump/

Entire Thread
Subject	Posted By	Posted
Dry sump inlet	Al_Alguire	07/02/14 12:51 AM
Re: Dry sump inlet	SpareParts	07/02/14 12:58 AM
Re: Dry sump inlet	Gary Robbins	07/02/14 01:19 AM
Re: Dry sump inlet	boatracer572	07/02/14 04:44 AM
Re: Dry sump inlet	boatracer572	07/02/14 04:46 AM
Re: Dry sump inlet	boatracer572	07/02/14 04:55 AM
Re: Dry sump inlet	boatracer572	07/02/14 04:56 AM
Re: Dry sump inlet	J_BODY	07/02/14 05:17 AM
Re: Dry sump inlet	Al_Alguire	07/02/14 07:09 AM
Re: Dry sump inlet	Al_Alguire	07/02/14 07:10 AM
Re: Dry sump inlet	littleVAL	07/02/14 02:31 PM
Re: Dry sump inlet	rickseeman	07/02/14 04:10 PM
Re: Dry sump inlet	AndyF	07/02/14 05:56 PM
Re: Dry sump inlet	boatracer572	07/02/14 07:49 PM
Re: Dry sump inlet	kens avenger	07/07/14 07:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1