Quote:
Sounds more like a case of gassing out/solvent pop,....no photos of the area?
what was the primer/sealer colour prior to laying down the base colour
Mike
I agree with Mike...This happened to me with a body panel that I shot in the late fall with too cold of a temp. possibly. I probably didn't let the coats flash long enough at that temp. When I went to wet sand a few days later, I had the same exact problem occur. Looks just like white dust embedded in the clear ,but as smooth as glass.
1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
|