I'm getting ready to take my 71 Challenger to the paint shop and I need to know about the front clips for the revel molding. The back studs are all intact and the couple of places that don't have studs have a hole located in the proper spot. The front studs are in good shape but it looks like the body man did some repair on the A pillar. I can't tell if he welded up some holes or ground off the studs.The place in question is the top of the a pillar on both sides. Are the top two revel clips supposed to be on studs or screwed in on a 71? I can't find a picture on R/T specialties site to see how many of each type is required.