Aluminum block Main clearance

Print Thread

Re: Aluminum block Main clearance [Re: MR_P_BODY] #1612909 04/30/14 04:35 PM 04/30/14 04:35 PM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Quote: Quote: It is an aluminum block. It does expand, no? I would think you would want a little under .003 cold if anything. Just my 2 cents. But it expands in all directions... not just inward But the caps are not aluminum. So what is the effect of the expansion then. Is it only the upper bearing shell effected? 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Entire Thread
Subject	Posted By	Posted
Aluminum block Main clearance	jafr	04/28/14 02:28 AM
Re: Aluminum block Main clearance	Chris'sBarracuda	04/28/14 01:31 PM
Re: Aluminum block Main clearance	Mopar-Al	04/28/14 05:51 PM
Re: Aluminum block Main clearance	PLUM BAD	04/29/14 05:15 AM
Re: Aluminum block Main clearance	jafr	04/29/14 09:42 PM
Re: Aluminum block Main clearance	an8sec70cuda	04/29/14 10:14 PM
Re: Aluminum block Main clearance	Cab_Burge	04/30/14 01:53 AM
Re: Aluminum block Main clearance	rickseeman	04/30/14 05:30 AM
Re: Aluminum block Main clearance	MR_P_BODY	04/30/14 06:14 AM
Re: Aluminum block Main clearance	jafr	04/30/14 02:45 PM
Re: Aluminum block Main clearance	Hemi Allstate	04/30/14 08:35 PM
Re: Aluminum block Main clearance	rickseeman	04/30/14 09:09 PM

Hop To