Pinion angle help - Moparts Forums

Register Log In Moparts Forums Corners Are Best - Handling Tech Pinion angle help

Print Thread

Re: Pinion angle help [Re: Sport440] #1598421 03/27/14 12:12 AM 03/27/14 12:12 AM
Joined: Jul 2008 Posts: 240 Plano, Texas 6 68cuda440 enthusiast
68cuda440 enthusiast 6 Joined: Jul 2008 Posts: 240 Plano, Texas	Quote: Quote: Quote: If I am interpreting correctly your diff is pointing 4.5 degrees downward toward the u-joint. Thats a wrong interpretation, The diff is pointing down 4.5 degrees from parallel measured by a angle finder thats based off of a parallel plane. What I mean is the nose is lower than the axle tube, correct? Parallel to the ground correct?

Entire Thread
Subject	Posted By	Posted
Pinion angle help	383BeepBeep	03/26/14 01:26 AM
Re: Pinion angle help	meepmeep70	03/26/14 01:33 AM
Re: Pinion angle help	Sport440	03/26/14 02:07 AM
Re: Pinion angle help	383man	03/26/14 02:10 AM
Re: Pinion angle help	68cuda440	03/26/14 02:32 AM
Re: Pinion angle help	68cuda440	03/26/14 02:25 AM
Re: Pinion angle help	Sport440	03/26/14 04:33 AM
Re: Pinion angle help	68cuda440	03/27/14 04:12 AM
Re: Pinion angle help	brads70	03/27/14 02:48 PM
Re: Pinion angle help	Sport440	04/09/14 03:18 AM
Re: Pinion angle help	Copper Dart	04/17/14 07:20 PM
Re: Pinion angle help	Sport440	03/26/14 03:13 AM
Re: Pinion angle help	Viol8r	03/26/14 04:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer, tommoparts

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1