Quote:

---

Quote:

---

So, I've taken the cell apart several times, replaced the white gaskets and tightened it to what I feel is tight. I'm afraid if I go too tight I will crack the gasket. But no matter what I've tried it still has a very, very slow leak. Has anyone else had this issue? Do you have any ideas for a fix that will work, short of buying an aluminum cell with welded bungs, that's my last resort...

---

I've never had that problem with the 2 Jaz cells I have used.

It sounds like something is worn?

I would recommend a good pipe dope. Dope will seal fuel. Good luck.

---

I'll try cranking it down one more time like Rick suggested,if that still doesn't work I'll try the pipe dope.

Thanks for the suggestions