Hey guys,, if any of you have installed the transgo auto trans
shift kits SKTFSC or TF1 or TF2. a couple of quick questions...

1) Did you have to make any fuel/ignition timing changes after
installing the shift kit?

I'm noticing a hesitation from a fully stopped position with light
or medium throttle pressure it bogs down/ hesitates.
I never had that before..

Some times when I snap the accelerator I get a backfire through the
carb...

Again never had this problem before the shift kit...

2) Did any of you notice a sort of double hit when shifting from 1st
to 2nd? it's kind of strange actually, the car feels like its
shifting from 1-2 twice... the first one is kind of weak the next on
is firm....and no it's separate from the 2-3 shift.

I'm quite sure I followed every instruction provided with the kit....
but obviously I'm DIY so I'm the only one to blame

Anybody have any experience with this?
Any help would be appreciated!

The only thing that has changed is the shift kit...
but I also added a 2qt deep aluminum oil pan and 2 more qts of auto trans fluid if that matters....


Thanks for the ad....