LSA is 110, advertised duration is 290/298, it is a solid cam, lashed at .014/.016 cold with aluminum heads (Hot lash supposed to be .016/.018).

Intake closing point is 69.5 degrees after bottom dead center @.015 (as given by Comp).

I will mention, the rings are not yet fully seated as I haven't gotten it on the street for a good beating. I'm just trying to quickly get the tune up close before I take it out.

The reason I want to throw in a lower PV is that it is so close to the opening point at idle, and the idle mixture screws are a little un-responsive/lazy feeling.

Now I need to pin those needles, got to feel that heat
Hear my motor screamin while I'm tearin up the street