Quote:

I was told to post over here so I will try again. I have a 74 dart drag car. The problem I am having is when it pulls the front wheels off the ground the front tires go in at the top. I have caltracs on it and they say you need 5" of travel for them to work. It doesn't do it so much if I leave the stops in, but if I take them out it looks bad in pictures. I have seem Mopar with the front up and there tires are staight how can I get this or is it just how it is. Thank



Where is the camber now? Is it positive? Offset upper bushings will help if it's negative? Are the lower control arm bushings worn? Is the K-Frame shimmed down from the rails? The lower arm is longer than the upper. If you have the front end raised the upper is already at a downward angle. Address all these items 1st.
Doug