Quote:

I used one like that in a 68 Dart

I just used a drive shaft with a slip yoke

worked good and bolted right in with a drive shaft change





dont know how right behind the rear seal is a roller bearing no way a slip yoke would slid in the tail housing unless you are talking about making a drive shaft with a slip joint like they use in a truck.

70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake

best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4