440 Source CNC heads

Print Thread

Re: 440 Source CNC heads [Re: mopowers] #154465 11/22/08 08:36 AM 11/22/08 08:36 AM
Joined: May 2007 Posts: 54 Illinois T Ted P member
Ted P member T Joined: May 2007 Posts: 54 Illinois	Does anyone know if the CNC is with the stock intake port size or has it been enlarged to the max wedge port. I want to run them with a six pack intake manifold.

Entire Thread
Subject	Posted By	Posted
440 Source CNC heads	dare_dude	11/21/08 07:42 PM
Re: 440 Source CNC heads	challenger1320	11/21/08 08:20 PM
Re: 440 Source CNC heads	Triple Threat	11/21/08 10:21 PM
Re: 440 Source CNC heads	mopowers	11/21/08 11:21 PM
Re: 440 Source CNC heads	Ted P	11/22/08 12:36 PM
Re: 440 Source CNC heads	moderncylinder	11/22/08 02:26 PM
Re: 440 Source CNC heads	AndyF	11/22/08 04:33 PM
Re: 440 Source CNC heads	440Jim	11/22/08 05:09 PM
Re: 440 Source CNC heads	GTSDave	11/22/08 05:32 PM
Re: 440 Source CNC heads	AndyF	11/22/08 06:52 PM
Re: 440 Source CNC heads	71cudaddict	11/22/08 05:38 PM
Re: 440 Source CNC heads	tpabayflyer	11/24/08 03:17 PM
Re: 440 Source CNC heads	B1Fish540	11/22/08 07:51 PM
Re: 440 Source CNC heads	ProSport	11/22/08 08:14 PM
Re: 440 Source CNC heads	jyrki	11/24/08 07:53 AM
Re: 440 Source CNC heads	moparniac	11/24/08 10:11 AM
Re: 440 Source CNC heads	jamesc	11/24/08 11:02 AM
Re: 440 Source CNC heads	moparts	11/24/08 01:50 PM
Re: 440 Source CNC heads	Twostick	11/24/08 04:32 PM
Re: 440 Source CNC heads	MoparDonny	11/25/08 02:27 AM
Re: 440 Source CNC heads	rustbucket	11/25/08 02:32 AM
Re: 440 Source CNC heads	moderncylinder	11/25/08 02:42 AM
Re: 440 Source CNC heads	gregsdart	11/25/08 02:51 AM
Re: 440 Source CNC heads	Hyper Henry	11/25/08 02:53 AM
Re: 440 Source CNC heads	dstryr	11/25/08 03:12 AM
Re: 440 Source CNC heads	moderncylinder	11/26/08 02:04 AM
Re: 440 Source CNC heads	Runner	11/26/08 02:19 AM
Re: 440 Source CNC heads	moderncylinder	11/26/08 02:22 AM
Re: 440 Source CNC heads	jyrki	11/26/08 07:35 AM
Re: 440 Source CNC heads	moderncylinder	11/26/08 12:47 PM
Re: 440 Source CNC heads	AAR-B4	11/26/08 01:28 PM
Re: 440 Source CNC heads	Cab_Burge	05/17/09 05:28 AM
Re: 440 Source CNC heads	dare_dude	05/18/09 11:42 AM
Re: 440 Source CNC heads	JAKE68	05/18/09 02:15 PM
Re: 440 Source CNC heads	deaks	05/18/09 02:33 PM
Re: 440 Source CNC heads	JAKE68	09/28/09 12:51 PM
Re: 440 Source CNC heads	Harley	05/18/09 05:34 PM
Re: 440 Source CNC heads	JAKE68	05/18/09 06:59 PM
Re: 440 Source CNC heads	70VcodeCoronetRT	09/26/09 09:06 PM
Re: 440 Source CNC heads	sshemi	09/27/09 08:44 AM
Re: 440 Source CNC heads	gregsdart	09/27/09 01:53 PM
Re: 440 Source CNC heads	MoparDonny	11/25/08 02:49 AM
Re: 440 Source CNC heads	thecarfarmer	11/26/08 02:16 AM
Re: 440 Source CNC heads	rustbucket	11/26/08 04:41 PM
Re: 440 Source CNC heads	DaytonaTurbo	11/26/08 04:53 PM
Re: 440 Source CNC heads	moderncylinder	11/26/08 05:01 PM
Re: 440 Source CNC heads	Dave64	11/26/08 05:35 PM
Re: 440 Source CNC heads	domingo	11/26/08 06:10 PM
Re: 440 Source CNC heads	RobX4406	11/26/08 06:45 PM
Re: 440 Source CNC heads	Von	11/26/08 06:57 PM
Re: 440 Source CNC heads	RobX4406	11/26/08 07:14 PM
Re: 440 Source CNC heads	69sixpackbee	11/27/08 02:36 AM
Re: 440 Source CNC heads	Von	05/16/09 05:17 AM
Re: 440 Source CNC heads	therocks	05/16/09 12:42 PM
Re: 440 Source CNC heads	RobX4406	05/16/09 06:33 PM
Re: 440 Source CNC heads	tjmarcus1	05/16/09 06:51 PM
Re: 440 Source CNC heads	Diego_Ted	05/16/09 08:23 PM
Re: 440 Source CNC heads	G_bob	05/17/09 12:19 AM
Re: 440 Source CNC heads	junkyardmaxie	05/18/09 03:51 PM
Re: 440 Source CNC heads	dthemi	05/17/09 01:22 AM
Re: 440 Source CNC heads	1_WILD_RT	05/17/09 01:41 AM
Re: 440 Source CNC heads	tjmarcus1	05/17/09 02:00 AM
Re: 440 Source CNC heads	71Pan	05/17/09 04:01 AM
Re: 440 Source CNC heads	Joshs68	05/17/09 02:00 AM
Re: 440 Source CNC heads	BDS871Cuda	05/18/09 03:51 PM
Re: 440 Source CNC heads	dare_dude	05/15/09 10:42 PM
Re: 440 Source CNC heads	junkyardmaxie	09/27/09 02:22 PM
Re: 440 Source CNC heads	RemCharger	09/27/09 03:21 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To