What weights should I shoot for when scaling my car?

Print Thread

Re: What weights should I shoot for when scaling my car? [Re: DodgeCharger] #1507388 09/25/13 10:55 AM 09/25/13 10:55 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	It usually has a bit more weight on the RR to counter act the torque of the driveshaft...the weight will vary due to the amount of torque.. remember that the RR tire is trying to lift up and spin the rear end around the drive shaft... the RR weight COULD be any where between 10# to 50# or maybe more... you load the RR to make it drive straight off the launch

Entire Thread
Subject	Posted By	Posted
What weights should I shoot for when scaling my car?	DodgeCharger	09/25/13 02:41 PM
Re: What weights should I shoot for when scaling my car?	MR_P_BODY	09/25/13 02:55 PM
Re: What weights should I shoot for when scaling my car?	Cab_Burge	09/25/13 08:57 PM
Re: What weights should I shoot for when scaling my car?	an8sec70cuda	09/25/13 10:16 PM

Hop To