B&M FINNED ALUMINUM TRANS PAN?

Print Thread

Re: B&M FINNED ALUMINUM TRANS PAN? [Re: ] #1494876 09/02/13 08:47 PM 09/02/13 08:47 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Get a transmission temperature gauge and put it in the 1/8" port hole in the B & M pan. Only way you'll know if your hot or not. I like the Autometer electric trans. gauge.Uses a 1/8" sender. Once that oil gets hot,with no cooler it is tough to bring it down especially with extra fluid. Once it's hot it's hot. I use the water temp gauge and another water temp sensor for my trans temp... I use a toggle switch so I can flip between the two and read on the same gauge... works great

Entire Thread
Subject	Posted By	Posted
B&M FINNED ALUMINUM TRANS PAN?	Labratt	09/02/13 02:38 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	hemi-itis	09/02/13 02:52 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	dwayne welder	09/02/13 02:55 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	ProSport	09/02/13 03:23 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	bonefish	09/02/13 03:35 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	ahy	09/02/13 04:07 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	Labratt	09/02/13 04:37 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	MR_P_BODY	09/02/13 04:52 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	Labratt	09/03/13 12:27 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	MR_P_BODY	09/03/13 12:47 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	MR_P_BODY	09/03/13 02:27 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	ProSport	09/03/13 03:40 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	MR_P_BODY	09/03/13 03:48 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	polyspheric	09/06/13 05:13 AM
Re: B&M FINNED ALUMINUM TRANS PAN?	moparx	09/07/13 01:41 PM
Re: B&M FINNED ALUMINUM TRANS PAN?	Labratt	09/07/13 06:17 PM

Hop To