Quote:

---

I run an auxilary electric cooling fan in front of my aluminum radiator. I really don't want to impede any more air with a trans cooler...that's why I believe the deep pan alone will be good for my set-up,and usage. Heck..the trans survived for 11 yrs. of harsh duty..with just a Mopar Performance extra capacity pan...which wasn't much more than stock!

---

Like you said Randy... your set up has worked for years
with out issue... the added volume will be fine without
a cooler if you still run the radiator cooler... you
can mount a cooler in the rear somewhere with a small
fan on a thermo switch if you want... that way you
get more line(thats volume and cooling) then it turns
on when/if it needs too... if you dont want it in the
rear see if you can mount one flat between the radiator
and the front of the crank... with either a fan or
just a small wind deflector to direct air up through it
but then it only works when rolling
EDIT
This is the cooler I mounted on the bottom of the
radiator... I dont have a a cooler in the radiator
so I had to put one somewhere... this is on my 518
trans with a 5000 stall conv and OD so when its in
OD I have 9% slippage at low rpms.. so far its been
working fine in the miles I have on it at about 90*
temp on the Woodward week