Quote:

I will mess with the springs and see what I can do. Just odd how much difference their is from not running to running. It is not a heat issue because you can tell it right away when you start it up cold.



i'm not sure what you mean by this, can you elaborate?

it looks to me like the angle that the throttle cable is at in relation to the position on the linkage is good. check it by going to WOT. the cable should be at roughly the same angle, i.e. the cable should not be at a different angle than what the clamped section in the bracket is.

it also looks like your setup is not progressive. with the stock manifold there is no reason that it shouldn't be, as far as i know.

i use the stock repop springs on mine, and they work well.

Last edited by mickm; 06/03/13 04:57 PM.