What voltage should be on the out-side of the ballast?

Print Thread

Re: What voltage should be on the out-side of the balla [Re: Supercuda] #1431417 05/07/13 10:31 PM 05/07/13 10:31 PM
Joined: Jan 2003 Posts: 1,359 Buzzard County, FL IronWolf pro stock
IronWolf pro stock Joined: Jan 2003 Posts: 1,359 Buzzard County, FL	The real point is that most people use crummy coils, crummy ballast resistors, when if you do the math, one can come up with a good setup (like mine) 1/4 ohm resistor with a chrome box. I don't get yer math ; Ohm's law is still V=IR. So , scuff.

Entire Thread
Subject	Posted By	Posted
What voltage should be on the out-side of the ballast?	demon	05/06/13 10:28 PM
Re: What voltage should be on the out-side of the ballast?	BigBlockMopar	05/06/13 10:42 PM
Re: What voltage should be on the out-side of the ballast?	IronWolf	05/06/13 11:05 PM
Re: What voltage should be on the out-side of the balla	demon	05/06/13 11:32 PM
Re: What voltage should be on the out-side of the balla	IronWolf	05/06/13 11:57 PM
Re: What voltage should be on the out-side of the balla	demon	05/07/13 12:30 AM
Re: What voltage should be on the out-side of the balla	Cab_Burge	05/07/13 07:32 AM
Re: What voltage should be on the out-side of the balla	BigBlockMopar	05/07/13 08:12 AM
Re: What voltage should be on the out-side of the balla	Supercuda	05/07/13 12:55 AM
Re: What voltage should be on the out-side of the balla	Jjs72D	05/07/13 06:23 AM
Re: What voltage should be on the out-side of the balla	IronWolf	05/08/13 02:31 AM
Re: What voltage should be on the out-side of the balla	383man	05/08/13 02:59 AM
Re: What voltage should be on the out-side of the balla	Supercuda	05/09/13 01:45 AM
Re: What voltage should be on the out-side of the ballast?	Sinitro	05/07/13 01:34 AM

Hop To