Gear reduction starter 'end head' bushing.

Print Thread

Gear reduction starter 'end head' bushing. #1430050 05/04/13 01:33 AM 05/04/13 01:33 AM
Joined: Feb 2012 Posts: 637 SoMd, USA 1 135sohc OP mopar
135sohc OP mopar 1 Joined: Feb 2012 Posts: 637 SoMd, USA	In the process of removing the battery cable from the starter the solenoid wire stud snapped off. Not a huge problem, I found the brush and solenoid assembly is available as one complete pre-assembled unit for $35 locally. Figured I would just give the whole unit a freshen up and replace all the bushings as well. Found two of the three easily enough but I cannot locate a source for the bushing in the 'end head' portion of the starter. Per the fsm its not serviced except through replacing the part which of course isnt really possible anymore. Someone makes it, unless all the rebuilders are totally blowing smoke and getting lucky enough to not have to replace it frequently ?

Entire Thread
Subject	Posted By	Posted
Gear reduction starter 'end head' bushing.	135sohc	05/04/13 05:33 AM
Re: Gear reduction starter 'end head' bushing.	scratchnfotraction	05/04/13 01:58 PM
Re: Gear reduction starter 'end head' bushing.	NITROUSN	05/04/13 06:33 PM
Re: Gear reduction starter 'end head' bushing.	135sohc	05/05/13 05:25 AM

Hop To