Building a 438 stroker, what heads would you run?

Print Thread

Building a 438 stroker, what heads would you run? #1417661 04/10/13 08:59 AM 04/10/13 08:59 AM
Joined: Jul 2004 Posts: 751 Hermiston Oregon M mopar_leaner OP super stock
mopar_leaner OP super stock M Joined: Jul 2004 Posts: 751 Hermiston Oregon	I'm building a 440 source 431=a .030 over 383 with a 3.75 stroke crank and 6.76 rods. Flat top pistons, Edelbrock performer RPM intake and 1411 750 carb, Isky hyd. cam .465 lift and .280 dur. and its going in a 727 shifted 71 cuda. 3.23 gears and an 3000 stall 11" converter. MSD ignition and headers. I'm looking for the best bang for the buck along with longevity, and low maintenance. What do you think of the Stealth heads? Or what else would you run for heads on this combo and still run pump gas? thanks Moparts!!! Last edited by mopar_leaner; 04/11/13 01:59 AM. ( it takes a Mopar, to beat a Mopar! email me at moparleaner@gmail.com )

Entire Thread
Subject	Posted By	Posted
Building a 438 stroker, what heads would you run?	mopar_leaner	04/10/13 12:59 PM
Re: Building a 438 stroker, what heads would you run?	Cab_Burge	04/10/13 01:24 PM
Re: Building a 438 stroker, what heads would you run?	70Cuda383	04/10/13 02:50 PM
Re: Building a 438 stroker, what heads would you run?	383man	04/10/13 03:43 PM
Re: Building a 438 stroker, what heads would you run?	70Cuda383	04/10/13 03:46 PM
Re: Building a 438 stroker, what heads would you run?	gregsdart	04/10/13 06:50 PM
Re: Building a 438 stroker, what heads would you run?	Chris2581	04/10/13 10:54 PM
Re: Building a 438 stroker, what heads would you run?	tex013	04/11/13 12:47 AM

Hop To