273 cam - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 273 cam

Print Thread

Re: 273 cam [Re: 65rbdodge] #1411051 03/30/13 10:13 AM 03/30/13 10:13 AM
Joined: Sep 2007 Posts: 14,889 up yours Supercuda About to go away
Supercuda About to go away Joined: Sep 2007 Posts: 14,889 up yours	Quote: Quote: Dropping in a 318 would be easier. a motor swap is easier than a cam swap? It is if it isn't you doing it. To the OP, all you really need to swap in a hydraulic cam is the cam, the hydraulic lifters and a set of new push rods for hydraulic cam to adjustable rockers. They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.

Entire Thread
Subject	Posted By	Posted
273 cam	hemidere	03/30/13 02:50 AM
Re: 273 cam	skicker	03/30/13 02:54 AM
Re: 273 cam	Jim_Lusk	03/30/13 04:11 AM
Re: 273 cam	RapidRobert	03/30/13 03:10 AM
Re: 273 cam	hemidere	03/30/13 03:37 AM
Re: 273 cam	ahy	03/30/13 04:11 AM
Re: 273 cam	hemidere	03/30/13 04:25 AM
Re: 273 cam	RapidRobert	03/30/13 04:38 AM
Re: 273 cam	hemidere	03/30/13 11:46 PM
Re: 273 cam	cageman	03/31/13 01:32 AM
Re: 273 cam	jcc	03/30/13 11:35 AM
Re: 273 cam	65rbdodge	03/30/13 02:01 PM
Re: 273 cam	rbstroker	03/30/13 02:12 PM
Re: 273 cam	Supercuda	03/30/13 02:13 PM
Re: 273 cam	Anonymous	03/30/13 02:37 PM
Re: 273 cam	jcc	03/30/13 08:14 PM
Re: 273 cam	scratchnfotraction	03/31/13 05:17 AM
Re: 273 cam	hemidere	03/31/13 05:34 AM
Re: 273 cam	Dodgem	03/30/13 06:56 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1