R3 block 9.6 Deck vs 9.0 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech R3 block 9.6 Deck vs 9.0

Print Thread

Re: R3 block 9.6 Deck vs 9.0 [Re: SCMopar] #1393171 03/02/13 11:39 AM 03/02/13 11:39 AM
Joined: Apr 2003 Posts: 3,519 Tulsa, Oklahoma 340Cuda master
340Cuda master Joined: Apr 2003 Posts: 3,519 Tulsa, Oklahoma	What size are the main bearings and cam bearings in your 9.00 block? Of course if you don't have a cam or crank yet it would not matter. Bill

Entire Thread
Subject	Posted By	Posted
R3 block 9.6 Deck vs 9.0	SCMopar	02/25/13 03:23 AM
Re: R3 block 9.6 Deck vs 9.0	tubtar	02/25/13 02:07 PM
Re: R3 block 9.6 Deck vs 9.0	SCMopar	02/25/13 02:29 PM
Re: R3 block 9.6 Deck vs 9.0	joshking440	02/25/13 02:36 PM
Re: R3 block 9.6 Deck vs 9.0	SB449VALIANT	02/25/13 10:19 PM
Re: R3 block 9.6 Deck vs 9.0	Leon441	02/26/13 02:11 AM
Re: R3 block 9.6 Deck vs 9.0	WHITEDART	02/26/13 02:31 AM
Re: R3 block 9.6 Deck vs 9.0	Leon441	02/26/13 02:08 AM
Re: R3 block 9.6 Deck vs 9.0	fishy340	02/26/13 02:29 AM
Re: R3 block 9.6 Deck vs 9.0	pfm	02/26/13 03:02 AM
Re: R3 block 9.6 Deck vs 9.0	SCMopar	02/27/13 08:37 PM
Re: R3 block 9.6 Deck vs 9.0	340Cuda	03/02/13 03:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1