Quote:

Yes there is a tooth difference. The front axle is made by Dana Spicer, the rear is chrysler. You are also dealing with 2 different diameter ring and pinions..


Not if it was a 3/4 ton. Than its Dana front and rear unless the rare 8 lug 9.25 is in it. But since his ratio is 3.2 its a 1/2 ton But yes they are All off a bit on ratios I believe in all the big 3.
I would assume D60 front and rear would be the same or possibly slight difference also. You buying new or want a stock used setup? I probably have Stock if interested