Quote:

hi guy's just gitn some opinons on what cam you guy's would run ? here's my engine combo so far. std bore 440 with trw 2295 dome pistons. i beleive they are 11.5 comp. stealth heads milled 0.30 mild port work. team g intake 4500 flange port matched to heads. i will be running proparts 2" primary header's 3500 stall 4.10 gear 28" tire in a 3200lb duster. oh would like to run a 1050 dominator carb whatcha think?



with that carb intake compression you could probably go .600 lift easy IF you have the right springs, rockers, etc. and can have the pistons cleared to the valves for that lift.

if using stock rockers and dont want to cut the pistons you should probably not go so big and still should thoroghly check the piston/valve clearances