Quote:

Have had plugs out, checked cap, wires, rockers, pushrods, timing, carb is new, disassembled anyway, adjusted perfect, choke works fine, cars runs GREAT after warmed up, but still has minor shake, not a miss, like a vacumm leak. sprayed intake & carb no change, checked all bolts..... so that's why i am here,,,,,,,
Start car, idles w/choke at 12-1500, no miss no pop, nothing except shaking until warm.....




How did you adjust the choke door when it was cold..
there is a spec(usually a drill size) and that will
be a tad lean... then once the door is set then you
set the cold idle rpm on the choke cam