I working on installing new springs and Caltracs in my 67 Satellite.

Since I bought the Caltracs used from a buddy I'm trying to figure out if I have all the parts.
Small parts like washers always seem to be missing on used parts.
The springs are new Mopar Perf XHD stock replacement.

Doing a web search hasn't shown me much detail.

What I'm trying to figure out is there anything that goes between the front spring hanger and the bellcranks?

Sorry for the size of the pic, it's off the web and not my actual parts.


I installed and tightened the main bolt and it seems tight on the bellcranks.
I'm thinking it would limit the bellcrank twisting easily.

It's my first time ever installing Caltracs and I'm trying to do it right the first time.

This all started when I was test fitting the TTI Exhaust.
I was gonna install the exhaust, the do the spring swap/caltrac install but I figured out the exhaust would get in the way on the spring swap.

Nothing ever goes as planned.

Edit: last reply has explanation of the latest problem/delay.